मैनुअल Qazqa 92303 New York लैम्प

आपके Qazqa 92303 New York लैम्प के लिए मैनुअल की आवश्यकता है? नीचे आप हिंदी में पीडीएफ मैनुअल मुफ्त में देख और डाउनलोड कर सकते हैं। इस उत्पाद पर वर्तमान में 7 अक्सर पूछे जाने वाले प्रश्न, 0 टिप्पणियाँ और 0 वोट हैं। यदि यह वह मैनुअल नहीं है जो आप चाहते हैं, तो कृपया हमसे संपर्क करें।

क्या आपका उत्पाद खराब है और मैनुअल में कोई समाधान नहीं दिया गया है? मुफ्त मरम्मत सेवाओं के लिए Repair Café को देखें।

मैनुअल

100°
Fig.1(A) Detection R ange
2M
2.0 M
8M
5M
F ig .1(B ) O K F ig.1(C ) N O T G O O D
Fig. 1(D)
Wall
R
oof
North
New York WL Dark Grey
92303
INSTRUCTION MANUAL
Unchangeable LED
Max.4x0.5W LED
3000K±300K
10000H
3 x 1.2V AA
900mAh
Ni-MH
Rechargeable
battery
III
IP44
INTRODUCTION
The L antern Light has a build-in PIR
(Passive Infra Red) sensing device which
continuously scans a preset zone and
automatically switches the light on when it
detects movement in that area. Once
movement is detected within the range of
the sensor the light will switch on
automatically to illuminate pathways,
steps, patios, porches, or whatever area
you have selected to light for reasons of
safety, convenience or security. While
there is movement within range of the unit
the light will remain on.
During the day, the solar panel converts
sunlight into electricity to recharge the
batteries for LED light. This Lantern Light
has an adjustable TIME dial that allows
light duration of up to 90 seconds. When
the batteries are fully charged, it is
estimated that LED can work up to max. 60
times when TIME be set to 1.5 minutes,
totally 1.5 hours.
This unit includes 3 x 1.2V AA 900mAh
Ni-MH Rechargeable battery batteries,
which need to be replaced after 2-years
use, because the charging ability will
decrease.
HAVE YOUR SENSOR WORKED
WELL
To have sensor worked well, we suggest
you take the following points into account:
Ideally the Lantern Light should be mounted
1.8 to 2.5 meters (6 to 8ft) above the area to be
scanned (refer to Fig.1A).
To avoid damage to unit, do not aim the sensor
towards the sun.
To avoid nuisance triggering, the sensor should
be directed away from heat sources such as
barbecues, Air-conditioners, other outside lighting,
moving cars and flue vents.
To avoid nuisance triggering, keeping away from
the area of strong electromagnetic disturbance.
Do not aim towards reflective surfaces such as
smooth white walls, swimming pools, etc...
The sensor scanning specifications (approx. 6
meters at 100°-- round) may vary slightly depending
on the mounting height and location. The detection
range of the unit may also alter with temperature
change. Before selecting a place to install your lantern
light you should note that movement across the scan
area is more effective than movement directly toward
or away from the sensor (refer Fig.1B). If movement is
made walking directly towards or away from the
sensor and not across, the apparent detection range
will be substantially reduced. (refer to Fig. 1C)
CHOOSE LOCATION FOR YOUR LIGHT
This light’s power comes
from sunlight. For max sun
exposure and longer light
output, place the solar
panel, connecting to the
light, in a position that
receives at least 4-6 hours
direct sunlight per day.
refer to Fig. 1DIdeally,
the solar panel should be
adjusted to the angle facing
the sun. Placing the solar
panel in a shaded location
will not allow the batteries to be charged fully. It will
reduce the number of hours the light operates per
night.
This Solar Light is ideal for areas where electricity
is not available, including driveways, garages,
entrance doors, backyard sheds and other remote
areas, for safety and convenience around your home.
222.2 mm
177.1mm
374.4 mm
161.1 mm
127mm
120.3 mm
Fig.2(A)
हिंदी में मैनुअल डाउनलोड करें (PDF, 1.11 MB)
(पर्यावरण का ध्यान रखें और मैनुअल को तभी प्रिंट करें जब इसकी वास्तव में ज़रूरत हो)

रेटिंग

उत्पाद की रेटिंग देकर, हमें बताएं कि आप Qazqa 92303 New York लैम्प के बारे में क्या सोचते हैं। क्या आप इस उत्पाद के बारे में अपने अनुभव साझा करना चाहते हैं या प्रश्न पूछना चाहते हैं? कृपया पेज के निचले हिस्से में टिप्पणी लिखें।
क्या आप Qazqa 92303 New York लैम्प से संतुष्ट हैं?
हां नहीं
इस उत्पाद की रेटिंग करने वाले पहले व्यक्ति बनें
0 वोट

इस उत्पाद के बारे में बातचीत में भागीदारी करें

आप Qazqa 92303 New York लैम्पके बारे में क्या सोचते हैं, यहां पर उसे आप साझा कर सकते हैं। यदि आपका कोई प्रश्न है, तो सबसे पहले सावधानी से मैनुअल को पढ़ें। हमारे संपर्क फॉर्म का इस्तेमाल करके मैनुअल का अनुरोध किया जा सकता है।

इस मैनुअल के बारे में अधिक जानकारी

हम समझते हैं कि आपके Qazqa 92303 New York लैम्पके लिए पेपर मैनुअल होना बेहतर होगा। आप हमेशा हमारी वेबसाइट से मैनुअल डाउनलोड कर सकते हैं और खुद इसे प्रिंट कर सकते हैं। यदि आप मूल मैनुअल प्राप्त करना चाहते हैं, तो हम आपको Qazqa से संपर्क करने की सिफारिश करते हैं। वे संभवत: मूल मैनुअल प्रदान कर सकते हैं। क्या आप अपने Qazqa 92303 New York लैम्प के लिए अलग भाषा में मैनुअल की खोज़ कर रहे हैं? हमारे होम पेज़ पर अपनी पंसदीदा भाषा चुने तथा मॉडल नम्बर की खोज करें ताकि आप यह देख सकें कि क्या यह उपलब्ध है।

स्पेसिफिकेशन

ब्रांड Qazqa
मॉडल 92303 New York
श्रेणी लैम्प्स
फाइल प्रकार PDF
फाइल साइज़ 1.11 MB

Qazqa लैम्प्स के लिए सभी मैनुअल
लैम्प्स के और मैनुअल

Qazqa 92303 New York लैम्प के बारे में अक्सर पूछे जाने वाले प्रश्न

हमारी सहायता टीम द्वारा उपयोगी उत्पाद जानकारी की खोज की जाती है और अक्सर पूछे जाने वाले प्रश्नों के उत्तर दिए जाते हैं। यदि हमारे अक्सर पूछे जाने वाले प्रश्नों में आपको कोई गलती नज़र आती है, तो संपर्क फॉर्म का इस्तेमाल करके, कृपया हम से संपर्क करें।

क्या सभी एलईडी प्रकाश व्यवस्था मंद हो सकती है? सत्यापित किया गया

नहीं, सभी एलईडी लाइटें मंद नहीं होतीं। यह पैकेजिंग या लाइट पर ही दर्शाया गया है।

यह उपयोगी साबित हुआ था (462) और पढ़ें

मैंने अपने लैंप में नई रोशनी डाली है लेकिन वह जलती नहीं है, ऐसा क्यों है? सत्यापित किया गया

कुछ लैंप एक विशिष्ट वाट क्षमता के प्रकाश स्रोतों के लिए बनाए जाते हैं। जब कोई प्रकाश स्रोत डाला जाता है जिसके लिए लैंप द्वारा प्रदान की जा सकने वाली क्षमता से अधिक वाट क्षमता की आवश्यकता होती है, तो प्रकाश चालू नहीं हो सकता है। यदि लैंप प्रकाश स्रोत की तुलना में बहुत अधिक वाट क्षमता प्रदान करता है, तो प्रकाश स्रोत जल सकता है।

यह उपयोगी साबित हुआ था (314) और पढ़ें

प्रकाश का रंग क्यों महत्वपूर्ण है? सत्यापित किया गया

आमतौर पर प्रकाश दो प्रकार का होता है, गर्म प्रकाश और ठंडा प्रकाश। ठंडी रोशनी आपको तेज और जागृत रखती है। गर्म रोशनी का आरामदायक प्रभाव होता है। प्रकाश की गर्मी को केल्विन में मापा जाता है और इसे लैंप की पैकेजिंग पर ही दर्शाया जाता है।

यह उपयोगी साबित हुआ था (255) और पढ़ें

लुमेन क्या है? सत्यापित किया गया

लुमेन किसी स्रोत द्वारा उत्सर्जित दृश्य प्रकाश की कुल मात्रा को मापने की एक इकाई है।

यह उपयोगी साबित हुआ था (190) और पढ़ें

कौन से पेंच आधार मौजूद हैं? सत्यापित किया गया

दुनिया भर में कई प्रकार के सॉकेट हैं, लेकिन सबसे अधिक उपयोग एडिसन स्क्रू पर आधारित होते हैं, जिन्हें ई अक्षर से दर्शाया जाता है। अधिकांश देशों में स्क्रू बेस E27 और E14 मानक हैं। संयुक्त राज्य अमेरिका में E26, E17, E12 और E10 मानक हैं।

यह उपयोगी साबित हुआ था (142) और पढ़ें

वाट्स मेरे लैंप के बारे में क्या कहते हैं? सत्यापित किया गया

वाट बिजली की खपत मापने की एक इकाई है। जो लैंप अधिक प्रकाश उत्पन्न करते हैं, वे आम तौर पर अधिक वाट का उपयोग करते हैं, लेकिन प्रकाश उत्पादन की तुलना करने के लिए आपको हमेशा लुमेन का उपयोग करना चाहिए।

यह उपयोगी साबित हुआ था (113) और पढ़ें

एलईडी क्या है? सत्यापित किया गया

LED का मतलब लाइट-एमिटिंग डायोड है। अर्धचालक के माध्यम से बिजली को सही दिशा में चलाने से प्रकाश उत्सर्जित होता है।

यह उपयोगी साबित हुआ था (97) और पढ़ें
मैनुअल Qazqa 92303 New York लैम्प

संबंधित उत्पाद

संबंधित श्रेणियाँ